"Chrome Straight" Electric Towel Rail (700h x 600w)

Image Gallery (Click to Enlarge)

Electric towel rails are ideal for homes without a central heating system (such as apartments) or bathrooms with no pipework running into them
Electric towel rails add the designer touch to a bathroom and give you the luxury of warm, fluffy towels at the click of a switch.
"Chrome Straight" means the horizontal bars have a straight profile (unlike the "Chrome Curved" rails which bend out towards you). FYI: "Straight" rails have a 95mm projection, "Curved" rails have a 100mm projection, so there is little difference between them.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Single Heat element can be used in conjunction with: 1. Our "Temperature Control Plate" (with 2hr timer function); 2. A standard timer (to be sourced from your electrician); 3. Our "Housing Unit" (which hides the element cap and wire).

Denotes you can click for further info.

Height (mm): 700
Width (mm): 600
Depth [wall to front inc brackets] (mm): 95-125 (adjustable by moving interconnecting bracket)
Base Material: Low Carbon Mild Steel
Salt Tested (anti corrosion): ASTM B117
Outer Finish: Sparkling Chrome
Chrome Plating (microns): 50.3
Tube Diameter (mm): 22
Compliancy: British EN442
Heat Output: BTUs (element): 682
Heat Output: Watts (element): 200
Volts (element): 230
Length of Probe (element) (mm): 240
Length of Wire (metres): 1.2
IP Rating (Ingress Protection): 54
Temp Range ^oc (element): 65
Bar Pattern: 4 bars, 10 bars
Fixtures: 4 x Fixing Brackets (plugs & screws)
Guarantee: 5 Years (rail), 2 Years (element)
Includes: Bleed Valve & Blank Plugs
Total No. of Tappings: 4 (1x element; 1x bleed; 2x blanks)
Manufactured: Turkey (Hand Built)
Pressure Tested (bars): 13