"Claro" Chrome VH Electric Towel Rail (900h x 300w)

Image Gallery (Click to Enlarge)

View rail priced as:

Central Heating (& Dual Fuel)

View
View rail priced as:

Single Heat Electric (65°)

View
This rail is:

Variable Heat Electric (20-70°)

View
Guide to heated towel rails

Claro features a rack of circular bars which sweep out from a left hand sided rear upright column, then circle back again to a right hand sided upright.

Gaps allow for the rolled up or hanging storage of towels; practical and stylish making a statement in a designer bathroom seeking dinstinction.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).