Electric Towel Rail | Stainless Steel Copra | 770h X 500w

Geyser "COPRA" Brushed Stainless, Electric Towel Rail: One Fixed Temp.
(770h x 500w)

Image Gallery (Click to Enlarge)
Geyser "COPRA" Brushed Stainless, Electric Towel Rail: One Fixed Temp.

  • Copra {italian for covering} is an inspirational twist on the standard towel rail design, with bars which reach out towards the right, from the two left anchored uprights, making the bars look as if to float across the wall.
  • This product will arrive in a bespoke size wooden crate, ensuring it is in no less than perfect condition for you.
  • Product can be mounted either way up with bars reaching out to the left or the right side.
  • Note: We previously sold the "Copra" under the name "Entice" - this is a purely a name change and the product design remains the same.

Electrical Specification:

  • This electric towel rail contains a water based heating solution with 2 Fernox glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
  • The electric towel rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
  • Your electrician will simply turn the electric towel rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
  • IMPORTANT: Our comprehensive double sided A4 fitting instructions are included, with detailed notes on how to correctly commission your electric towel rail for internal THERMAL EXPANSION, which *must* be carried out during installation by your electrician.
  • This Single Heat (fixed temperature) element can be used in conjunction with: 1. Our "Temperature Control Plate" (with 2hr boost function); 2. Our separate fully pre-programmable 7 day timer (see accessories section, right, for both of these devices).

Denotes you can click for further info.

  • Heat Output: Watts (element): 300
  • Heat Output: BTUs (element): 1023
  • Height (mm): 770
  • Width (mm): 500
  • Depth [wall to front inc brackets] (mm): 65-115 (adjustable by removing interconnecting barrel)
  • Guarantee: 5 Years (Rail), 2 Years (Element)
  • Base Material: Stainless Steel
  • Stainless Steel Grade: 304
  • Outer Finish: Brushed Stainless Steel
  • Compliancy: British EN442
  • Volts (element): 230
  • Length of Probe (element) (mm): 245
  • Length of Wire (metres): 1.2
  • IP Rating (Ingress Protection): 54
  • Internal Operating Temp Range oc (of radiator using this element): 65
  • Compatible with our External Timer Device: Yes
  • Quantity of Bars: 4 bars, 4 bars, 8 bars
  • Fixtures: 4x Brackets welded to rear of Vertical Bars
  • Total No. of Tappings: 2 (1x element; 1x blank; bleed valve is pre fitted to rear of ra
  • Manufactured: Turkey (Hand Built)
  • Pressure Tested (bars): 6.5
  • View tech spec as PDF

  • Order Before 2pm & Receive Your Order the Next Working Day

    inc. VAT

    Delivery is included in the Price*
    *except for orders containing accessories only, where you can choose to pay £2 Royal Mail or £7 Parcelforce, per order.
    *except for addresses in remote areas of the UK.
    Click For More Info on Delivery

    Stock Code: COPR-770X500-E

    Convert to Euros

    Copyright © 2003 - 2018 geyser.co.uk. All rights reserved