"Copra" Stainless Steel VH Electric Rail (770h x 500w)

Image Gallery (Click to Enlarge)

View rail priced as:

Central Heating (& Dual Fuel)

View
View rail priced as:

Single Heat Electric (65°)

View
This rail is:

Variable Heat Electric (20-70°)

View
Electric Towel Rails Guide

Copra {italian for covering} is an inspirational twist on the standard towel rail design, with bars which reach out towards the right, from the two left anchored uprights, making the bars look as if to float across the wall.

This product will arrive in a bespoke size wooden crate, ensuring it is in no less than perfect condition for you.

Note: We previously sold the "Copra" under the name "Entice" - this is a purely a name change and the product design remains the same.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).

Northwest Showroom

Southwest Showroom

"Copra" Stainless Steel VH Electric Rail
(1200h x 500w)

Denotes you can click for further info.

Height (mm): 770
Width (mm): 500
Depth [wall to front inc brackets] (mm): 65-115 (adjustable by removing interconnecting barrel)
Base Material: Stainless Rail
Stainless Steel Grade: 304
Outer Finish: Brushed Stainless Steel
Compliancy: British EN442
Heat Output: BTUs (element): 1023
Heat Output: Watts (element): 300
Volts (element): 230
Length of Probe (element) (mm): 285
Length of Wire (metres): 1.5
IP Rating (Ingress Protection): 54
Temp Range ^oc (element): 20-70
Bar Pattern: 4 bars, 4 bars, 8 bars
Fixtures: 4x Brackets welded to rear of Vertical Bars
Guarantee: 25 Years (Rail), 2 Years (Element)
Includes: Bleed Valve & Blank Plugs
Total No. of Tappings: 2 (1x element; 1x blank; bleed valve is pre fitted to rear of ra
Manufactured: Turkey (Hand Built)