"Curves" Polished Stainless St VH Elec Rail (560h x 430w)

Image Gallery (Click to Enlarge)

Curves is made from stainless steel put through a multi-stage polishing process to create a spectacular exterior finish, with nickel and chrome that ensures high corrosion resistance.
Unique and unusual geometric design of loops which protrude and return to the rail at each stage dropping down the rail vertically.
Stainless steel allows you to dry textile products with zippers and other metallic or rigid parts without risk of damaging the electroplated coating.
Manufactured from food grade stainless steel AISI 304, that is intended for high-pressure piping which will suit all hot water supply systems regardless of water quality and its chemical compound.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).

"Curves" Polished Stainless Steel VH Electric Rail
(750h x 520w)