"Element - Single Heat" 400watt (White) ()

Image Gallery (Click to Enlarge)

What is an Element Used For?

An element is fitted to a heated towel rail enabling it to be used with an electric supply being fed directly to it.
This means you don't need to turn the central heating system to use the rail.
It is important to note that a towel rail has to be prepared to be used as electric, by filling it with the appropriate solutions, sealing it and fitting the element in place.
See the Electric Towel Rails category to see our range of rails that we sell as complete packages (pre filled, sealed and inclusive of the element).

About This Non Thermostatic Element

This 400watt element is suitable for use with heated towel rails between 800mm high and 1400mm high.
This element will heat your towel rail to the maximum safe operation of 65 degrees and then efficiently maintain that temperature.
Note: Please adhere to the element/towel rail size match above, as installing an element with a higher heat output will not make your towel rail hotter. You would still achieve a maximum of 65 degrees but your element would be working much harder because the internal self regulation thermostat would be forcing it to switch on/off too many times thus shortening the life of the element.
White finish cap with a white flex, suitable for white towel rails.
Simply screws into one of the threads at the bottom of the towel rail. Left or right.
Standard fitting, suitable for all UK specification towel rails with a 15mm thread (1/2" British Standard Pipework).
This element can also be used in conjuction with a timer! A timer can be sourced from your qualifed electrician.
Note: If you are intending to use this element on a Dual Fuel Towel Rail, you must also buy a Chrome T-Piece.