"Mirus" Chrome VH Electric Towel Rail (900h x 500w)

Image Gallery (Click to Enlarge)

Mirus has a great design with sparkling chrome bars which protrude away from the wall and then curve around at the sides - this gives much more space to dry large bath towels and beach size towels.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).

FYI: OCCASSIONAL DELAYS WHEN SUPPLYING AS ELECTRIC

When supplied as electric, this rail needs a clear run inside the upright columns to house the element's probe.
Sometimes during the manufacturing process the machines can leave small internal projections preventing the element being fully inserted.
This can sometimes lead to slight delays as some of the models coming off the line cannot be made into electric. If there should be any delay in your order, we shall telephone you to advise you and we can offer alternatives or a refund if the delay is too long.