MHS "Oval" Stainless Steel VH Electric Towel Rail (1200h x 500w)

Image Gallery (Click to Enlarge)

View rail priced as:

Central Heating (& Dual Fuel)

View
View rail priced as:

Single Heat Electric (65°)

View
This rail is:

Variable Heat Electric (20-70°)

View
Electric Towel Rails Guide

Geyser designs and manufactures the majority of its own products, but also sells high end designer brands, such as this premium quality MHS product.

"MHS Oval" is a brushed stainless steel towel rail made from chunky oval shaped bars which hold a lot of water compared with standrd towel bars with smaller bars, therefore this model gives impressive heat outputs.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).

Northwest Showroom

Southwest Showroom

MHS "Oval" Stainless Steel VH Electric Towel Rail
(800h x 500w)

Denotes you can click for further info.

Height (mm): 1200
Width (mm): 500
Depth [wall to front inc brackets] (mm): 80-100 (adjustable by moving interconnecting bracket)
Base Material: Stainless Steel
Stainless Steel Grade: 304
Outer Finish: Brushed Stainless Steel
Pipe Centres (mm): 455
Tube Diameter (mm): 50
Compliancy: British EN442
Heat Output: BTUs (element): 2046
Heat Output: Watts (element): 600
Volts (element): 230
Length of Probe (element) (mm): 285
Length of Wire (metres): 1.2
IP Rating (Ingress Protection): 54
Temp Range ^oc (element): 20-70
Bar Pattern: 2 bars, 3 bars, 5 bars, 5 bars
Fixtures: 4x Mounting Brackets + Fixings
Guarantee: 25 Years
Total No. of Tappings: 4 (1x Element, 2 Blank plug, 1 Bleed Valve)
Manufactured: Turkey
Pressure Tested (bars): 6
Weight (Boxed) (kg): tbc
H x W x D (Boxed) (mm): tbc
Volume (ltrs) tbc