"Salisbury" VH Electric Towel Warmer (952h x 685w)
-
View rail priced as:
Central Heating (& Dual Fuel)
View -
View rail priced as:
Single Heat Electric (65°)
View -
This rail is:
Variable Heat Electric (20-70°)
View - Electric Towel Rails Guide
- Salisbury takes the form of a ladder rail, surrounded in a traditional floor & wall mounted chrome plated brass surround.
- This towel warmer will arrive packaged in a polystyrene mould, ensuring it is no less than perfect condition for you.
- Note: This exact size and model is on display in our Manchester based showroom, click here for more details on the showroom.
Electrical Specification:
- This traditional electric towel warmer contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
- The towel warmer will arrive fully sealed, fitted with 2x blank plugs, with PTFE tape fitted around the threads (for a water tight seal).
- Your electrician will simply turn the electric towel warmer on its side (depending on which side you want the element fitting), remove the side blank plug and screw the element into place (which is also pre fitted with PTFE tape).
- Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
- This towel warmer will be suppled with a "Tempeature Control Plate", giving you Thermostatic temperature control of the element, along with a 2hr countdown timer function. All controlled from the panel which you will have instead of a standard blank plate. For more info about the plate supplied, click here.
Denotes you can click for further info.
- Height (mm): 952
- Width (mm): 685
- Depth [wall to front inc brackets] (mm): 125
- Base Material: Mild Steel
- Outer Finish: Sparkling Chrome
- Chrome Plating (microns): Nickel 15; Chromium 0.3
- Tube Diameter (mm): Outer Frame: 30mm, 5 Inner Horizontal Bars: 25mm
- Heat Output: BTUs (element): 2046
- Heat Output: Watts (element): 600
- Volts (element): 230
- Length of Probe (element) (mm): 595
- Length of Wire (metres): 1.5
- IP Rating (Ingress Protection): 54
- Temp Range oc (element): 20-70
- Bar Pattern: 7 Bars
- Fixtures: 2 x floor & 2 x wall (plugs & screws)
- Guarantee: 5 Years (Radiator), 2 Years (Element)
- Total No. of Tappings: 2 (2x Blank, element fitted elsewhere at side)
- Pressure Tested (bars): 10
Order Before 2pm & Receive Your Order the Next Working Day
£322.00
inc. VAT
Delivery Included*
*if total order value is over £40
*if you're not in a remote area of the UK.
Click For More Info on Delivery
