"Serpente" St. Steel VH Elec T. Rail/Mirror (890h x 500w)

Image Gallery (Click to Enlarge)

View rail priced as:

Central Heating (& Dual Fuel)

View
View rail priced as:

Single Heat Electric (65°)

View
This rail is:

Variable Heat Electric (20-70°)

View
Electric Towel Rails Guide

Serpente {italian for snake} is a unique 'looping' bar design, which interloops in and out of the mirror fronted central box column, providing a dual function heated towel rail plus face mirror.

Extremely contemporary designer heated towel rail, for those seeking something truly different for their bathroom.

Note: We previously sold the "Serpente" under the name "Dynamic" - this is a purely a name change and the product design remains the same.

Note: This exact size and model is on display in our Manchester based showroom, click here for more details on the showroom.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).

Northwest Showroom

"Serpente" St. Steel VH Elec T. Rail/Mirror
(1306h x 500w)

Denotes you can click for further info.

Height (mm): 890
Width (mm): 500
Depth [wall to front inc brackets] (mm): 75-125 (adjustable by removing interconnecting barrel)
Base Material: Stainless Steel
Stainless Steel Grade: 304
Outer Finish: Brushed Stainless Steel
Tube Diameter (mm): 21
Compliancy: British EN442
Heat Output: BTUs (element): 1023
Heat Output: Watts (element): 300
Volts (element): 230
Length of Probe (element) (mm): 285
Length of Wire (metres): 1.5
IP Rating (Ingress Protection): 54
Temp Range ^oc (element): 20-70
Bar Pattern: 8 Alternating Loops
Fixtures: 4x Brackets welded to rear of Upright Mirror Section
Guarantee: 25 Years (Rail), 2 Years (Element)
Includes: Bleed Valve & Blank Plugs
Total No. of Tappings: 2 (1x element; 1x blank; bleed valve is pre fitted to rear of ra
Manufactured: Turkey (Hand Built)