"Intorno" Stainless Steel VH Electric Rail (1240h x 520w)

Image Gallery (Click to Enlarge)

Intorno {italian for around} is a stunning stainless steel design with bars which sweep out towards you and circle back to the uprights in the rear centre.
This heated towel rail makes statement in itself, so if you're looking to really stylise your designer bathroom... seriously consider the Intorno.
Note: We previously sold the "Intorno" under the name "Spica" - this is a purely a name change and the product design remains the same.
Note: This exact size and model is on display in our Manchester based showroom, click here for more details on the showroom.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Variable Heat element has '+' and '-' buttons to adjust the temp, across 5 settings, in increments of 10 degrees (each LED will flash whilst warming and then turn static once that temp is achieved).

"Intorno" Stainless Steel VH Electric Rail
(760h x 520w)

Denotes you can click for further info.

Height (mm): 1240
Width (mm): 520
Depth [wall to front inc brackets] (mm): 195-235 (adjustable by removing interconnecting bracket barrel)
Base Material: Stainless Steel
Stainless Steel Grade: 304
Outer Finish: Brushed Stainless Steel
Tube Diameter (mm): 21
Compliancy: British EN442
Heat Output: BTUs (element): 2046
Heat Output: Watts (element): 600
Volts (element): 230
Length of Probe (element) (mm): 285
Length of Wire (metres): 1.5
IP Rating (Ingress Protection): 54
Temp Range ^oc (element): 20-70
Bar Pattern: 16 bars
Fixtures: 4x Brackets welded to rear of Vertical Bars
Guarantee: 25 Years (rail), 2 Years (element)
Includes: Bleed Valve & Blank Plugs
Total No. of Tappings: 2 (1x element; 1x blank; bleed valve is pre fitted to rear of ra
Manufactured: Turkey (Hand Built)