"Tube on Tube" Chrome Electric Rail (800h x 500w)

Image Gallery (Click to Enlarge)

View rail priced as:

Central Heating (& Dual Fuel)

View
This rail is:

Single Heat Electric (65°)

View
View rail priced as:

Variable Heat Electric (20-70°)

View
Guide to heated towel rails

This complicated form of 'tube on tube' engineering can be seen in many hotel bathrooms, extremely fashionable, made from the highest quality chrome plated steel.
The 22mm horizontal bars sit on top of the 30mm vertical bars.

Electrical Specification:

This electric towel rail contains heating solution with 2 Fernox™ glycol compound additives: 1. Boiler Noise Silencer (which eliminates the kettle type sound from within) 2. Rust Inhibitor (which eliminates lime scale, with anti freeze & anti corrosion).
The rail will arrive fully sealed with 3x blank plugs and 1x bleed valve, all with PTFE tape fitted around the threads (for a water tight seal).
Your electrician will simply turn the rail upside down, to remove the left/right underside blank plug (your choice which side) and screw the element into place, which is also pre fitted with PTFE tape.
Our comprehensive double sided A4 fitting instructions are included, with notes on how to correctly bleed your electric towel rail on first use.
This Single Heat element can be used in conjunction with: 1. Our "Temperature Control Plate" (with 2hr timer function); 2. A standard timer (to be sourced from your electrician); 3. Our "Housing Unit" (which hides the element cap and wire).

"Tube on Tube" Chrome Electric Rail
(1200h x 600w)

"Tube on Tube" Chrome Electric Rail
(1450h x 600w)

"Tube on Tube" Chrome Electric Rail
(600h x 450w)

Denotes you can click for further info.

Height (mm): 800
Width (mm): 500
Depth [wall to front inc brackets] (mm): 90-120 (adjustable by moving interconnecting bracket)
Base Material: Low Carbon Mild Steel
Salt Tested (anti corrosion): ASTM B117
Outer Finish: Sparkling Chrome
Chrome Plating (microns): 50.3
Wall to Centre of Inlet (mm): 55
Tube Diameter (mm): 22
Compliancy: British EN442
Heat Output: BTUs (element): 682
Heat Output: Watts (element): 200
Volts (element): 230
Length of Probe (element) (mm): 240
Length of Wire (metres): 1.2
IP Rating (Ingress Protection): 54
Temp Range ^oc (element): 65
Bar Pattern: 5 bar, 11 bars
Fixtures: 4 x Fixing Brackets (plugs & screws)
Guarantee: 5 Years (Rail), 2 Years (Element)
Includes: Bleed Valve & Blank Plugs
Total No. of Tappings: 4 (1x element; 1x bleed; 2x blanks)
Manufactured: Turkey (Hand Built)
Pressure Tested (bars): 13