Valves "Square" Sparkling Chrome (Straight) ()

Image Gallery (Click to Enlarge)

Valves are required to connect your radiator or towel rail to your central heating pipework and are used to control the flow of water into the product.
Our “Square" Valves are ultra modern and best suited to products with a linear design, where the straight edge profile can continue right down to the valves.
The straight edges of the head of the valve will never go out of alignment with the base.. as you can unscrew the head and re-align it in line with the bottom section, as it fits over the top of multiple point cog wheel underneath it.
A Straight Valve is so called as the waterflow pipe is in a straight line, meaning the pipework enters the valve at one end and the product is connected to the valve at the other end (whereas on angled valves they are either end of a 90o right angled pipe).
These valves can be rotated to regulate the amount of water flowing into the radiator, giving you some control over the temperature. Note: For full control you should consider Thermostatic Valves (which are bigger in size and one valve is bigger than the other, so won't look quite as nice).

If you are unsure which valves to purchase:
- check the technical spec listed on your chosen product as we aim to recommend the valves you should buy
- telephone us for advice on 01942 677 792
- let your plumber specify which to buy