Aero White Horizontal Designer Radiator - 600mm high x 850mm wide

Introducing the Aero white, aluminium, designer radiator. This horizontal radiator has a stunning matt textured, anthracite finish and a 3,465 BTU output. Measuring 600mm x 850mm.

Key Features

Aluminium
Efficient
High output
Cost effective - every model under £399
Modern subtle convex flat panels with virtually no gaps between them
Dark grey air flow caps
Slimline - low projection from wall
100% aluminium, no stainless or steel pins used, fusion welded rather compression constructed
Lightweight, even by aluminium standards, good for fitting and couriers
All vertical models and the 600mm high x 660mm wide horizontal model can be made into towel rails with chrome plated towel bar attachment
When sold as central heating, it can only be fitted with side entry radiator valves

Range

Available in matt black, matt anthracite, matt mid grey and matt white. There are 8 stocked sizes in the range made up of 4 vertical models and 4 horizontal models. These sizes have been carefully selected to suit UK homes and provide a heating solution for every room in new or old houses. In particular, the 600mm high horizontal models make Aero a great refurbishment choice when upgrading from old white horizontal panel radiators.

All vertical models of Aero and the 600mm high x 660mm wide horizontal model can be used as heated towel rails. Just purchase the additonal Aero chrome plated towel bar. The bar stylishly loops across the front of Aero and discreetly connects on the reverse. These towel bars are a low cost optional extra and are available in the accessories section. All towel bars are polished chrome plated to contrast with the matt radiator colours.

Style

The Aero is a 2018 re-design of the well-established designer flat panel steel radiators. Now made from aluminium, the Aero is lighter and more efficient and is finished in contemporary matt colours that coordinate with modern UK interior furnishings and design. The harsh rectangular steel flat panels are now replaced with a subtle convex panel with softened edges. The spaces between panels is reduced to almost zero so that the whole radiator flows visually from end to end. The side profile of the radiator is more visually appealing than mild steel equivalents and the dark grey air flow caps, both top and bottom, are a desirable design feature. In short Aero is a new breed of designer radiator that meets new levels of expectation demanded for the contemporary home.   

Slimline

Aero are slimline high output designer radiators. This means that the total projection into the room (from the wall to the front edge of the radiator) is very low by designer radiator standards. This makes Aero a sleek design that is unobtrusive and ideal for limited spaces (behind doors or in hallways for example) where it is desirable to have your radiator as close to the wall as possible whilst still providing a good heat output. The fittings brackets are also finished in the same colour as the radiators.

Cost Effective

The Aero range brings high class, high quality designer radiators within the budget of most households in the UK. With every radiator in the range being less than £400 inc vat and delivery, it is now possible to complete a whole house with designer radiators, not just a statement in one room, without breaking the bank. Even the chrome towel bar to convert to a bathroom radiator can be as little as £22 at retail inc vat. These stylish radiators increase property attractiveness and values. 

Efficiency

Aero is very energy efficient because it is manufactured from aluminium. With the hidden hot water tubes distributing heat internally around the radiator, the individual front panels act as heat transmitters, drawing heat from the water tubes at the rear and then convecting and radiating heat out of the radiator and around the room. These panels transmit the heat from the radiator into the air very quickly and because the surface area of these fins is so large, Aero only needs 40-60% of the water content of a similar designer steel radiator to achieve the same heat output. Your energy bills should reduce by installing this aluminium designer radiator range.

Construction & Materials

Manufactured using advanced aerospace fusion technology. Unlike most aluminium ranges on the market which are made using compression connections of mild or stainless steel, the aerospace technology allows the Aero range to be made from 100% aluminium. This gives the Aero long term anti-corrosive properties. It also creates stronger and more stable water tight internal connections.

Installation

Being 100% aluminium and constructed using advanced technologies means the Aero is one of the most lightweight ranges on the market. And even though the aero range is extremely lightweight, there is no compromise on high heat output, which is more than 7000 Btu for the 1800mm x 660mm wide model. The lightweight nature and efficiently low water content of Aero, make it perfect for plasterboard walls and other less strong walls. These are useful advantages over standard, heavy mild steel radiators with large water content. Of course, it also makes the radiator easier for couriers to deliver and also easy to fit for the installer.