Chrome Temperature Control Plate With 2hr Boost Function - For Use With Fixed Heat Elements Only
Chrome Temperature control plate for use with fixed heat elements. Gives you the extra functionality of: Control of the Temperature 2 Hr Temperature Boost Function. Simple to use, with an "On/Off" button, "2 Hour Boost" button and + and - "Temperature Control" buttons. This device is not for use with variable thermostatic heating elements. This is because the temperature control function within this device will conflict with temperature control function within the variable thermostatic heating elements. This unit has a Chrome Finish (it is also available with a white finish). IP55 rated, so it is perfectly safe in the bathroom environment. Device can be fitted in replacement of the blank plate (normally situated next to the towel rail in bathroom). Unit is earthed through the pattress back box in the wall. C an be installed at any height. Avoid having to bend down to access buttons. "2 Hr Boost" Button - if unit is switched on the 2 hr boost button will take it up to full temperature for 2 hours then return it back to the setting it had before it was pressed. If unit is switched off and then the 2hr boost button is pressed, the unit will switch on and climb to full temperature for 2 hours. After 2hrs, it returns to the pre-set temperature. Unit works on the basis that it regulates the number of seconds per minute that the element is running at its normal temperature. Setting 5: Runs for 60 seconds of every minute. Setting 4: Runs for 48 seconds of every minute. Setting 3: Runs for 36 seconds of every minute. Setting 2: Runs for 24 seconds of every minute. Setting 1: Runs for 12 seconds of every minute. Therefore, in winter you may need to adjust the settings upwards. This is because the control plate will need to work for longer now that the ambient temperature of the room is likely to be much colder. There is no true 'thermostatic' control at work here. Timed power is controlling the temperature. This unit can be used in conjunction with our pre programmable 7 day, 24hr timer which will give you full control of when the product is switched on. The plate may be used to operate 2x electric towel rails or 2x electric radiators if the combined wattage doesn't exceed 1000 Watts. Device has an in built 5 amp fuse installed inside it, to provide safety against a child potentially pulling the flex out of the bottom of the unit.
Write Your Own Review