Heatpol HGT Chrome Thermostatic Horizontal Installation Heating Element - 300 watt
300 WATTS SKU:ELEM-CH-HP-300W
Order Before 2pm for Next Working Day Delivery
Heatpol HGT Brightly Polished Chrome Plated Thermostatic Horizontal Installation Heating Element - 300 watt
The Heatpol HGT range of elements are specially designed for horizontal installation and specifically intended for use in traditional old style column radiators and cast iron radiators.
We offer the HGT in four different colours, all of which lend themselves to a wide variety of finishes of traditional radiator:
The HGT is available in 3 different wattages, please note the diameter of the thread for the bigger outputs differs from the lowest output, so please ensure the radiator you plan to install this in has the correct diameter of tapping (opening for the element to screw into):
300w (1/2 inch diameter thread) chrome only
600w (1/2 inch diameter thread) chrome only
1200w (1/2 inch diameter thread)
1500w (3/4 inch diameter thread)
2000w (3/4 inch diameter thread)
Features an analogue dial control for smooth transition of the temperature across the entire range of 0 - 65 degree Celsius.
The temperature sensor is located inside the radiator/towel rail with HGT, therefore the temperature setting chosen is the temperature reading of the hot water inside the radiator.
Provided with a sealant for the thread to help ensure a water tight seal.
Features a gasket which allows the element to be rotated back on itself by up 360 degrees so that once screwed into position the control box will always align to sit upright.
This thermostatic heating element will work in conjunction with our separate 24hr 7 day programmable timer device.
Features an antifreeze function protecting the unit falling below 7 degrees Celsius - when switched on to the first position on the dial.
|Probe Length (mm)||340|
|Wire Length (Metres)||0.9|