Traditional Short 2 Column Radiator - Gunmetal Grey - 300mm x 1194mm

Once you have chosen the height and width, you then need to decide the depth of your old style radiator. This is worth considering as the appearance of the radiator will change along with the overall output and the radiators projection from the wall. Below are the overall projection depth measurements by column quantity.

2 columns deep, 95 mm

3 columns deep, 130 mm

4 columns deep, 165 mm

5 columns deep, 200 mm

6 columns deep, 240 mm

The choice of colour and finishes is considerable in the old style range. The most popular finishes and colours are often stocked and available next day. If you are looking for something outside of our normal stock range regarding texture, colour or size please get in touch.

This range is made at our manufacturers state of the art facility near Venice in Italy. Welded by high-tech robotic lasers, the finished steel then has a powder coat applied in the specialist painting facility. The old style range is made from mild steel and not cast iron. Mild steel heats faster than cast iron, is lighter and is a cheaper alternative to cast iron.

Although lighter than cast iron, steel column radiators still obtain a lot of weight when they are filled with water. especially if it is a particularly large model. Every designer radiator has standard wall mounting brackets included, which are very strong. However, if you know you have weak or plasterboard walls we strongly suggest you order some plaster board plugs from our accessories section. For sizeable models, specifically wide horizontal radiators you should consider ordering your radiator with welded feet for additional support.

All designer radiators in this range are supplied with an internal diverter which forces the water up and over inside the product. This aids water flow and ensures heat is distributed correctly. It is crucial that the diverter is installed to ensure optimum performance.